Whirlpool Oven & Range Manuals

Most Common Error Codes & Fault Indicators

• F1 E0 / F1 E1: Control board failure – Unplug for 5 minutes; may need to replace electronic control.
• F2 E0 / E1: Keypad disconnected or shorted – Check connections; replace touchpad if needed.
• F3 E0 / E1 / E2: Oven temperature sensor fault – Test sensor resistance (1080Ω at room temp); replace if open/short.
• F5 E0 / E1: Door latch issue – Check latch switch; run diagnostic mode.
• F9 / F9 E0: Door lock error (self-clean) – Manually unlock door; check lock motor.
• LOC / Lock icon: Child lock activated – Hold Control Lock for 3 seconds to disable.

Common Problems & Fixes (All Models)

• Oven not heating (electric): Check bake/broil elements for continuity; test igniter on gas models.
• Oven temperature inaccurate: Calibrate oven (±35°F); replace sensor if faulty.
• Self-clean not starting: Door must be fully closed; wait for oven to cool; check thermal fuse.
• Surface burner not igniting (gas): Clean burner ports; check spark module and electrodes.
• Air Fry not crisping: Use proper basket; preheat fully; do not overcrowd.
• Touchpad unresponsive: Unplug 5 minutes; clean control panel.

Wall Oven & Smart Models Specific

• Wi-Fi not connecting: Ensure 2.4GHz network; reset network settings in menu.
• Frozen Bake™ issues: Select correct food type; do not preheat.

Maintenance Tips

• Run AquaLift® self-clean cycle regularly (no harsh chemicals needed).
• Clean spillovers immediately to prevent baking on.
• Check and clean oven vent regularly.

Safety note: Always turn off power at breaker before servicing. Never use oven if door glass is cracked. Do not block vents.