Whirlpool User Guide Manual

User Manual & Installation Guide

Standard Capacity

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure

Step-by-Step Installation

  1. Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the appliance.
  3. Connect Water Supply: Connect hot and cold water supply lines to the water inlet valves. Use only new hoses.
  4. Connect Drain Hose: Route the drain hose into a standpipe or laundry tub with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
  6. Level the Appliance: Adjust the leveling legs to ensure the appliance is level from front to back and side to side.
  7. Test Run: Run the appliance through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series WHE1000
Type Front Load Washing Machine
Color Stainless Steel / White
Capacity Standard Load
Noise Level (Wash/Spin) 55 dB / 72 dB
Control Type Electronic Controls with Display
Energy Rating A++ (Highly Efficient)
Water Consumption 9,000 L/year
Power Requirements 230V, 50Hz, 10A
Dimensions (HxWxD) 85 x 60 x 60 cm
Weight 70 kg
Max Spin Speed 1300 RPM

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Motor Warranty: 5 years on main motor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

6th Sense Technology

Whirlpool's innovative 6th Sense technology automatically detects load size and fabric type, adjusting water, time, and energy usage for optimal cleaning results.

VarioDrum System

The VarioDrum with specially designed lifter ribs provides gentle yet effective washing action that's suitable for all fabric types from delicate to heavy duty.

Steam Refresh Cycle

Steam technology helps to remove odors, reduce wrinkles, and refresh clothes without needing a full wash cycle, saving time and energy.

Load & Go Dispenser

Large capacity detergent dispenser that can hold enough detergent for up to 20 loads, automatically dispensing the right amount for each cycle.

Quick Wash Program

Special quick wash cycle that cleans lightly soiled clothes in just 15 minutes, perfect for last-minute washing needs.

Anti-Allergy Cycle

Specially designed cycle that uses higher temperatures and extended rinsing to remove up to 99.9% of common allergens from fabrics.

Wash Programs Explained

Cotton

Standard program for cotton fabrics with adjustable temperature and spin speed

Synthetics

Gentle program for synthetic fabrics with reduced mechanical action

Delicates

Extra gentle program for delicate fabrics like silk and lace

Wool

Certified wool program that follows woolmark recommendations

Sportswear

Special program for technical fabrics that removes odors effectively

Jeans

Program specifically designed for denim fabrics to maintain color and shape

Troubleshooting

Problem Possible Cause Solution
Appliance won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect program Reduce load size, use correct detergent, select appropriate program
Water not draining Drain hose clogged or kinked Check drain hose for obstructions or kinks, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in drum, unbalanced load Check for foreign objects, redistribute load evenly
Vibration during spin Unbalanced load, uneven floor, shipping bolts not removed Redistribute load, level the machine, ensure shipping bolts removed

Error Codes

  • F01: Water supply issue - Check water supply and inlet valve
  • F02: Drain issue - Check drain hose and pump
  • F03: Temperature sensor issue - Contact service center
  • F04: Motor issue - Contact service center
  • F05: Door not closed properly - Ensure door is fully closed
  • F06: Unbalanced load - Redistribute clothes and restart

Manual Downloads

Current Model Manuals

WHE1000

Standard Capacity Washer

WHE1200

Large Capacity Washer

WHE800

Compact Washer

WHE1500

Premium Washer

Popular Previous Models

WHD100

10kg Capacity Washer

WHD90

9kg Steam Washer

WHD80

8kg Washer Dryer Combo

WHD70

7kg Front Load Washer

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.