Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Gas leak detector solution
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, away from combustible materials and with access to gas and electrical connections.
- Remove Packaging Materials: Remove all shipping materials, protective films, and tape from the range and oven interior.
- Gas Connection: Connect to a 1/2" NPT gas supply line using an approved flexible gas connector. Apply pipe thread sealant suitable for gas connections.
- Check for Leaks: Apply leak detector solution to all gas connections. If bubbles appear, tighten connections and retest. Never use an open flame to check for leaks.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. The range requires a dedicated 15-amp circuit.
- Anti-Tip Bracket Installation: Install and secure the anti-tip bracket to the floor or wall according to instructions to prevent tipping.
- Level the Range: Adjust the leveling legs to ensure the range is level from front to back and side to side.
- Test Operation: Test all burners, oven, and broiler functions to ensure proper operation before regular use.
Specifications
| Model Series | WGG745SF0S |
| Type | Freestanding Gas Range |
| Color | Stainless Steel / Black |
| Burner Configuration | 5 Burners (including Power Burner) |
| Burner BTU Ratings | Front: 15,000 BTU, Rear: 9,500 BTU each, Center: 5,000 BTU |
| Oven Capacity | 5.3 cu. ft. |
| Control Type | Knob Controls with Digital Display |
| Self-Cleaning | Yes (Pyrolytic) |
| Convection Oven | Yes (True European Convection) |
| Power Requirements | 120V, 60Hz, 15A |
| Gas Requirements | Natural Gas: 5" WC, LP Gas: 10" WC |
| Dimensions (HxWxD) | 47 x 30 x 28 inches |
| Weight | 145 lbs |
Warranty Information
- Full Warranty: 1 year parts and labor
- Burner Caps & Grates: 5 years
- Oven Cavity & Door Liner: 5 years
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Power Burner
15,000 BTU burner provides rapid boiling and high-heat cooking capabilities, perfect for searing meats and bringing large pots to boil quickly.
True European Convection
Third heating element and fan circulate hot air evenly throughout the oven cavity, eliminating hot spots and reducing cooking times by up to 25%.
FlameSelect™ Burners
Precise flame control with distinct settings from simmer to boil allows for exact temperature management for various cooking techniques.
Self-Cleaning Oven
Pyrolytic cleaning system heats oven to approximately 880°F to burn off food residue, reducing it to ash that can be easily wiped away.
Air Fry Capability
Special convection setting circulates hot air at high speed to crisp foods with little to no oil, providing healthier fried food alternatives.
Stainless Steel Grates
Continuous cast-iron grates provide seamless movement of cookware across burners and are dishwasher safe for easy cleaning.
Cooking Modes Explained
Bake
Traditional baking with bottom element for even heating of cakes, cookies, and casseroles
Convection Bake
Fan-assisted baking for faster, more even cooking with multiple racks
Broil
Top element heating for browning and crisping meats, fish, and vegetables
Convection Roast
Circulated heat for evenly roasted meats with crispy exterior and juicy interior
Air Fry
High-speed convection for crispy fried foods with minimal oil
Warm
Low-temperature setting to keep cooked foods at serving temperature
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't light | Gas supply off, clogged burner ports, faulty igniter | Check gas supply, clean burner ports, ensure igniter clicks |
| Uneven flame | Clogged burner ports, improper air shutter adjustment | Clean burner thoroughly, adjust air shutter for blue flame |
| Oven not heating | Power issue, faulty bake element, control board problem | Check power supply, inspect bake element, reset circuit breaker |
| Gas odor | Gas leak, improper burner lighting | Immediately turn off gas, ventilate area, check for leaks |
| Self-clean not working | Door not locked, faulty lock mechanism, control issue | Ensure door locks properly, check lock mechanism, reset controls |
| Error codes displayed | Sensor failure, control board issue, wiring problem | Note error code, disconnect power for 1 minute, reconnect |
Error Codes
- F1: Oven temperature sensor failure - Check sensor connection
- F2: Oven temperature too high - Allow to cool, check ventilation
- F3: Oven temperature sensor short - Replace temperature sensor
- F4: Oven communication error - Reset power to range
- F5: Door lock mechanism failure - Check door lock assembly
- F7: Control panel communication error - Reset main power
Manual Downloads
Current Model Manuals
WGG745SF0S
30" Gas Range with Convection
WGG745SF0B
30" Gas Range Black
WGG745SF0W
30" Gas Range White
WGG745SF0SS
30" Gas Range Fingerprint Resistant
Popular Previous Models
WGG731SY2S
30" Gas Range with Air Fry
WGG541SF0S
30" Gas Range Standard
WGG505S0BS
30" Gas Range Budget Model
WGG660SF0S
30" Gas Range with Steam Clean