Installation Guide
Tools Needed:
- Adjustable wrench
- Screwdrivers (flat and Phillips)
- Level
- Teflon tape
- Water line kit
Step-by-Step Installation
- Choose Installation Location: Select a location near a water supply line and electrical outlet, ensuring proper ventilation around the unit.
- Prepare Water Connection: Turn off water supply and install a shut-off valve with 1/4" water line connection.
- Connect Water Supply: Connect the 1/4" copper water line to the ice maker's water inlet valve using proper fittings.
- Electrical Connection: Plug into a dedicated 120V, 60Hz, grounded electrical outlet. Do not use an extension cord.
- Level the Ice Maker: Adjust the leveling feet to ensure the ice maker is perfectly level for proper operation.
- Initial Setup: Turn on water supply, check for leaks, and allow the ice maker to complete its first cycle.
- Test Operation: Run the ice maker through several cycles to ensure proper ice production and quality.
Specifications
| Model Series | WIM1234X |
| Type | Standalone Ice Maker |
| Color | Stainless Steel / Black |
| Ice Production | 26 lbs per day |
| Storage Capacity | 15 lbs |
| Noise Level | 45 dB |
| Control Type | Digital Touch Controls |
| Energy Rating | Energy Star Certified |
| Water Consumption | 3.5 gallons per 100 lbs of ice |
| Power Requirements | 120V, 60Hz, 2.5A |
| Dimensions (HxWxD) | 33 x 15 x 24 inches |
| Weight | 48 lbs |
| Ice Type | Bullet Ice / Cube Ice |
Warranty Information
- Full Warranty: 1 year parts and labor
- Compressor Warranty: 5 years sealed system
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Fast Ice Production
Produces up to 26 pounds of ice per day with rapid freezing technology that creates ice in as little as 6-13 minutes per batch.
Dual Ice Selection
Choose between bullet ice for faster cooling in drinks or cube ice for longer-lasting cooling in beverages and coolers.
Smart Ice Making
Automatically adjusts ice production based on usage patterns and ambient temperature to optimize efficiency and performance.
Self-Cleaning Function
Built-in cleaning cycle helps remove mineral deposits and scale buildup, ensuring clean, fresh-tasting ice and maintaining optimal performance.
Energy Efficient
Energy Star certified design reduces energy consumption while maintaining high ice production capacity.
Large Storage Bin
15-pound storage capacity with easy-access lid and scoop included for convenient ice retrieval.
Ice Types Explained
Bullet Ice
Small, cylindrical ice that cools drinks quickly without diluting too fast
Cube Ice
Traditional square cubes that melt slowly, perfect for mixed drinks and entertaining
Clear Ice Technology
Special freezing process creates clearer, harder ice with less air bubbles
Ice Size Selection
Adjustable ice size settings for small, medium, or large ice pieces
Overflow Protection
Automatically stops ice production when storage bin is full
Quick Ice Function
Accelerated ice production mode for when you need ice quickly
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not producing ice | Water supply issue, temperature too warm, clogged filter | Check water supply, ensure room temperature is below 90°F, replace water filter |
| Ice tastes or smells bad | Old ice, dirty water filter, need cleaning cycle | Discard old ice, replace water filter, run cleaning cycle |
| Small or misshapen ice | Low water pressure, mineral buildup, faulty water inlet valve | Check water pressure, clean mineral deposits, check water inlet valve |
| Ice maker leaking water | Loose connections, clogged drain, cracked water line | Tighten connections, clear drain line, inspect water lines |
| Unusual noises | Fan obstruction, compressor issues, loose components | Check for obstructions, ensure proper ventilation, tighten components |
| Display error codes | Sensor failure, electrical issues, component malfunction | Refer to error code chart, reset unit, contact service if persistent |
Error Codes
- E1: Water supply error - Check water connection and pressure
- E2: Temperature sensor failure - Contact service center
- E3: Ice full sensor error - Check sensor connection
- E4: Motor/gear issue - Contact service center
- E5: Communication error - Reset unit, check connections
- E6: Evaporator temperature too high - Ensure proper ventilation
Manual Downloads
Current Model Manuals
WIM1234X
26 lb/day Ice Maker
WIM1235X
30 lb/day Pro Ice Maker
WIM1236X
Portable Countertop Ice Maker
WIM1237X
Built-in Ice Maker
Popular Previous Models
WIM1011A
22 lb/day Ice Maker
WIM9982B
25 lb/day Stainless Steel
WIM7755C
20 lb/day Compact
WIM6623D
18 lb/day Portable