Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe cutter
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections under a countertop or as a standalone unit.
- Remove Shipping Materials: Remove all shipping bolts, brackets, and packaging materials from the dishwasher interior and exterior.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hoses.
- Connect Drain Hose: Route the drain hose into a garbage disposal or sink drain with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15-amp dedicated circuit. Do not use an extension cord.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side for proper door alignment.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation before regular use.
Specifications
| Model Series | WDT970SAHZ / WDT750SAHZ |
| Type | Built-in Dishwasher |
| Color | Stainless Steel / Black Stainless |
| Place Settings | 16 Place Settings |
| Noise Level | 44 dBA (Quietest Setting) |
| Control Type | Hidden Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle (Normal Wash) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 34.5 x 23.8 x 24.5 inches |
| Weight | 95 lbs |
| Drying System | Third Level Drying with Fan Assist |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Racks & Tub: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Third Level Drying
Exclusive drying system uses a fan to circulate heated air throughout the tub, including the third rack, for completely dry dishes every time.
Direct Drive Motor
Whirlpool's durable Direct Drive motor connects directly to the wash arm without belts or gears, providing reliable performance with fewer moving parts.
Sensor Cycle
Intelligent sensors detect soil levels and adjust water temperature, cycle time, and wash actions automatically for optimal cleaning and efficiency.
Power Scour Plus
High-pressure jets and targeted spray zones remove tough, baked-on foods without pre-rinsing, saving time and water.
Clean Water Wash System
Filtration system with hard food disposer and multiple filters ensures only clean water circulates during the wash cycle for spot-free results.
Quiet Partner Sound Insulation
Advanced sound insulation materials and design reduce operating noise to as low as 44 dBA, quieter than normal conversation.
Wash Cycle Options
Sensor Wash
Automatically adjusts cycle based on soil level detection
Power Scour
Intensive cleaning for pots, pans, and baked-on foods
Express Wash
Quick 1-hour cycle for lightly soiled dishes
China/Crystal
Gentle cycle with lower water temperature for delicate items
Heated Dry
Extended drying with fan circulation for complete drying
Sani Rinse
High-temperature final rinse to sanitize dishes
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not latched, child lock engaged | Check power supply, ensure door is latched completely, check child lock |
| Poor cleaning results | Overloading, wrong detergent, clogged spray arms | Load dishes properly, use recommended detergent, clean spray arms |
| Water not draining | Drain hose clogged, garbage disposal blocked | Check drain hose for obstructions, run garbage disposal |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in pump, spray arm hitting dishes | Check for foreign objects, rearrange dishes properly |
| Dishes not drying | Rinse aid empty, heated dry option not selected | Refill rinse aid, select heated dry option |
Error Codes
- F1: Water fill issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Water temperature issue - Check water heater
- F4: Overflow detected - Check for leaks and water supply
- F5: Motor issue - Contact service center
- F6: Heater issue - Contact service center
- F7: Temperature sensor issue - Contact service center
- F8: Door switch issue - Ensure door is fully closed
Manual Downloads
Current Gold Series Models
WDT970SAHZ
Gold Series with Third Level Drying
WDT750SAHZ
Gold Series with Sensor Cycle
WDF760SAHZ
Gold Series with Fingerprint Resistant
WDT540SAHZ
Gold Series with Power Scour
Popular Previous Models
WDT920SAHZ
Gold Series with Clean Water Wash
WDT710SAHZ
Gold Series with Quiet Operation
WDF760SAHZ
Gold Series with Stainless Steel Tub
WDT730SAHZ
Gold Series with Sani Rinse