Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench (gas models)
- Tape measure
- Electrical tester
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, away from combustible materials and with adequate clearance from cabinets.
- Remove Packaging Materials: Remove all shipping materials, protective films, and tape from the range.
- Gas Connection (Gas Models): Connect to gas supply using approved flexible connector. Check for leaks with soap solution.
- Electrical Connection (Electric Models): Connect to proper 240V circuit with correct amperage rating. Ensure proper grounding.
- Anti-Tip Bracket Installation: Install anti-tip bracket to wall or floor as specified in instructions to prevent tipping.
- Position the Range: Carefully slide range into position, ensuring it's level and properly aligned with cabinets.
- Final Checks: Verify all connections are secure, install knobs and accessories, and perform initial test.
Specifications
| Model Series | WGE745C0FS / WFE745H0FS |
| Type | Freestanding Gas & Electric Range |
| Color | Stainless Steel / Black Stainless |
| Burner Configuration | 5 Burners (Gas) / 4 Elements (Electric) |
| Oven Capacity | 5.3 cu. ft. |
| Cooktop Power | 18,000 BTU (Gas) / 3,000W (Electric) |
| Control Type | Knob Controls with Digital Display |
| Self-Cleaning | Yes (Pyrolytic) |
| Convection Oven | Yes |
| Power Requirements | 120V/240V, 50A (Electric) / 120V, 15A (Gas) |
| Dimensions (HxWxD) | 90 x 76 x 61 cm |
| Weight | 75 kg |
Warranty Information
- Full Warranty: 1 year parts and labor
- Cooktop Warranty: 5 years on burners/elements
- Oven Warranty: 10 years on oven cavity
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Power™ Burner
High-powered burner delivers 18,000 BTUs for rapid boiling and high-heat cooking, perfect for searing meats and boiling large pots of water quickly.
Precise™ Burner
Low-heat burner provides precise temperature control for delicate tasks like melting chocolate or simmering sauces without scorching.
True Convection
Third heating element and fan circulate hot air evenly throughout the oven cavity, eliminating hot spots and reducing cooking times.
AquaLift® Technology
Low-temperature cleaning system uses water and heat to loosen baked-on spills, making oven cleaning easier without high heat or harsh chemicals.
Frozen Bake™ Technology
Special setting allows you to bake frozen foods without thawing first, adjusting time and temperature automatically for perfect results.
Quick Preheat
Rapidly heats oven to desired temperature in minutes, saving time and energy when you need to start cooking immediately.
Cooking Modes Explained
Bake
Standard baking with heat from bottom element for cakes, cookies, and casseroles
Convection Bake
Circulated heat for faster, more even baking with multiple racks
Broil
High heat from top element for browning meats and melting cheese
Convection Roast
Circulated heat for juicy meats with crispy exteriors
Warm
Low temperature setting to keep cooked foods warm without drying out
Proof
Precise low temperature for proofing bread dough
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't light (Gas) | Gas supply off, clogged burner ports, wet igniter | Check gas valve, clean burner, dry igniter area |
| Element won't heat (Electric) | Faulty element, loose connection, control issue | Check element continuity, tighten connections |
| Oven not heating properly | Faulty bake element, temperature sensor issue | Test bake element, check sensor resistance |
| Uneven cooking | Rack position incorrect, convection fan not working | Use recommended rack positions, check fan operation |
| Self-clean not working | Door not locked, control lock engaged | Ensure door closes completely, check lock mechanism |
| Error codes displayed | Sensor failure, control board issue | Note error code and contact service |
Error Codes
- F1: Oven temperature sensor failure - Check sensor connection
- F2: Oven temperature too high - Check bake element
- F3: Oven temperature too low - Check bake element and sensor
- F4: Door lock failure - Check lock mechanism and switch
- F5: Clock set error - Reset clock and controls
- F7: Shorted keypad - Check for moisture or spills
Manual Downloads
Current Model Manuals
WGE745C0FS
30" Gas Range with Convection
WFE745H0FS
30" Electric Range with Convection
WGE753C0FS
30" Gas Range with Air Fry
WFE753H0FS
30" Electric Range with Air Fry
Popular Previous Models
WGE745C0FW
30" White Gas Range
WFE745H0FW
30" White Electric Range
WGE735C0FS
30" Gas Range Standard
WFE735H0FS
30" Electric Range Standard