Installation Guide
Tools Needed:
- Adjustable wrench
- Screwdrivers (flat and Phillips)
- Level
- Water line kit
- Teflon tape
Step-by-Step Installation
- Prepare Water Supply: Turn off the main water supply and locate the nearest cold water line.
- Install Water Line: Connect ¼-inch copper tubing or approved plastic water line to the cold water supply.
- Connect to Refrigerator: Route the water line to the refrigerator location and connect to the water inlet valve.
- Secure Connections: Use compression fittings and ensure all connections are tight and leak-free.
- Install Ice Maker: If not factory-installed, mount the ice maker assembly in the freezer compartment according to model specifications.
- Electrical Connection: Ensure refrigerator is plugged into a properly grounded 120V, 60Hz outlet.
- Initial Setup: Turn on water supply, set ice maker to ON position, and allow 24 hours for first ice production.
Specifications
| Ice Maker Type | Automatic Ice Maker |
| Ice Production Rate | Up to 4 lbs per day |
| Ice Storage Capacity | 3-5 lbs |
| Ice Cube Type | Crescent-shaped cubes |
| Water Pressure Required | 20-120 psi |
| Water Line Size | ¼-inch OD copper or plastic |
| Operating Temperature | 0°F to 10°F (-18°C to -12°C) |
| Power Requirements | 120V, 60Hz (through refrigerator) |
| Compatible Models | Most Whirlpool French Door and Side-by-Side refrigerators |
| Filter Compatibility | EveryDrop™ Filter Series 1, 2, 3, 4 |
Warranty Information
- Ice Maker Warranty: 1 year parts and labor
- Sealed System Warranty: 5 years on compressor and related parts
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
EveryDrop™ Ice & Water Filtration
Advanced filtration system reduces 99% of lead and 30 other contaminants, providing clean, clear ice with better taste and odor reduction.
Quick Ice Production
Produces ice quickly with efficient freezing technology, delivering first batch of ice within approximately 2 hours of installation.
Easy-Fill Ice Bucket
Removable ice bucket with comfortable handle makes it easy to access and serve ice without removing the entire ice maker assembly.
Clean Ice Indicator
Smart indicator light alerts you when it's time to clean the ice maker system for optimal performance and ice quality.
Quiet Operation
Designed for minimal noise during ice production and harvesting cycles, maintaining quiet kitchen environment.
Energy Efficient
Optimized freezing cycles reduce energy consumption while maintaining consistent ice production.
Ice Making Process Explained
Fill Cycle
Water valve opens to fill ice mold with precise amount of filtered water
Freezing Cycle
Water freezes in mold for 2-3 hours at optimal freezer temperature
Harvest Cycle
Heating element warms mold to release ice cubes into storage bin
Storage
Ice accumulates in insulated bin to prevent melting and clumping
Shut-off
Automatic shut-off when bin is full or when ice maker is turned off
Self-Cleaning
Periodic flushing cycle helps maintain clean ice production
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not producing ice | Water supply issue, ice maker turned off, freezer temperature too warm | Check water supply, ensure ice maker is ON, verify freezer temperature is 0-10°F |
| Small or hollow ice cubes | Low water pressure, clogged water filter, restricted water line | Check water pressure (20-120 psi), replace water filter, inspect water line |
| Ice tastes or smells bad | Old water filter, contaminated water supply, need cleaning | Replace water filter, check water source, clean ice maker system |
| Ice maker leaking water | Clogged drain, misaligned water fill cup, overfilling | Clear drain tube, reposition fill cup, check water inlet valve |
| Ice cubes stuck together | Infrequent ice use, freezer door left open, high humidity | Use ice regularly, ensure door seals properly, check humidity levels |
| Slow ice production | High room temperature, frequent door openings, low water pressure | Maintain room temperature below 110°F, minimize door openings, check water pressure |
Error Codes & Indicators
- Ice Off Light: Ice maker is turned off - Press ice maker switch to ON position
- Water Filter Light: Filter needs replacement - Replace EveryDrop™ water filter
- Clean Ice Light: Ice maker needs cleaning - Perform cleaning cycle
- No Ice Production: Check water supply, freezer temperature, and ice maker arm position
- Overfilling: Water pressure too high or water inlet valve defective - Adjust pressure or replace valve
- Underfilling: Low water pressure or clogged filter - Check pressure and replace filter
Manual Downloads
Current Model Manuals
WRX735SDHZ
French Door Refrigerator with Ice Maker
WRS571CIHZ
Side-by-Side Refrigerator with Ice Maker
WRQA59CNKZ
4-Door Refrigerator with Dual Ice Makers
WRT318FZDM
Top Freezer with Ice Maker
Popular Previous Models
WRX735SDHW
French Door Refrigerator (White)
WRS321SDHZ
Side-by-Side with External Ice
WRF535SWHZ
French Door with Ice & Water
WRT111SFDM
Top Freezer with Internal Ice