User Manual for Whirlpool Gas Range

User Manual & Installation Guide

Gas Range with Convection Oven

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe thread sealant
  • Tape measure
  • Gas leak detector solution

Step-by-Step Installation

  1. Choose Installation Location: Select a location with proper ventilation, away from combustible materials and with access to gas and electrical connections.
  2. Remove Packaging Materials: Remove all shipping materials, protective films, and tape from the gas range.
  3. Gas Connection: Connect to gas supply using approved flexible gas connector. Apply pipe thread sealant to all connections. Check for leaks using leak detector solution.
  4. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC outlet. Do not use an extension cord.
  5. Anti-Tip Bracket Installation: Install and secure anti-tip bracket to floor or wall as specified in instructions.
  6. Level the Range: Adjust the leveling legs to ensure the range is level from front to back and side to side.
  7. Test Operation: Test all burners and oven functions to ensure proper operation and check for gas leaks.
Warning: All gas installations must be performed by a qualified installer or licensed gas fitter to ensure safety and maintain warranty coverage.

Specifications

Model Series WGRN789HT
Type Freestanding Gas Range
Color Stainless Steel / Black
Cooktop Burners 5 Sealed Burners
Burner Output 18,000 BTU (Power Burner)
Oven Capacity 5.8 cu. ft.
Oven Type Convection with True European
Control Type Electronic Touch Controls
Fuel Type Natural Gas or LP (Convertible)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 47 x 30 x 28 inches
Weight 185 lbs

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Burner Warranty: 5 years on sealed burners
  • Oven Warranty: 3 years on convection system
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Power Burner

18,000 BTU power burner provides intense heat for boiling water quickly and searing meats to perfection, reducing cooking time for large pots and pans.

True European Convection

Third heating element and fan provide consistent heat distribution throughout the oven cavity, eliminating hot spots and reducing cooking times by up to 30%.

Sealed Burners

Spills are contained in the cooktop bowl for easy cleanup. Burners are sealed to prevent food and liquids from entering the range interior.

Precise Simmer Burner

5,000 BTU simmer burner provides precise low-heat control for delicate sauces, melting chocolate, and keeping foods warm without burning.

Air Fry Capability

Convection system enables air frying with little to no oil, providing healthier fried foods with crispy texture and reduced fat content.

Easy-Clean Oven

Porcelain enamel oven interior and continuous cleaning oven bottom make cleanup simple and efficient after cooking.

Cooking Modes Explained

Convection Bake

Even baking with fan circulation for multiple racks of cookies and pastries

Convection Roast

Perfect for meats and poultry with crispy exterior and juicy interior

Air Fry

Healthier frying with circulating hot air for crispy results

Proof

Maintains ideal temperature for dough rising and yogurt making

Warm

Keeps cooked foods at serving temperature without overcooking

Self Clean

High-temperature cleaning cycle that reduces oven soils to ash

Troubleshooting

Problem Possible Cause Solution
Burner won't light Gas supply off, clogged burner ports, faulty igniter Check gas supply, clean burner ports, ensure igniter clicks
Uneven flame Clogged burner ports, improper air adjustment Clean burner ports, adjust air shutter if accessible
Oven not heating Power issue, control setting, faulty igniter Check power supply, verify control settings, listen for igniter
Gas odor Gas leak, improper burner lighting Check for leaks, ensure proper lighting procedure
Oven temperature inaccurate Calibration needed, faulty sensor Calibrate oven temperature, check sensor placement
Convection fan not working Power issue, faulty motor, obstruction Check power, listen for motor, remove any obstructions

Error Codes

  • F1: Oven temperature sensor failure - Check sensor connection
  • F2: Oven over temperature - Allow to cool, check ventilation
  • F3: Oven igniter failure - Check igniter operation
  • F4: Oven gas valve failure - Contact service center
  • F5: Control panel communication error - Reset power
  • F7: Convection fan motor failure - Check for obstructions

Manual Downloads

Current Model Manuals

WGRN789HT

30" Gas Range with Convection

WGRN785HT

30" Gas Range Air Fry

WGRN790HT

36" Pro Style Gas Range

WGRN795HT

30" Smart Gas Range

Popular Previous Models

WGRN505HS

30" Gas Range Standard

WGRN535HS

30" Gas Range Convection

WGRN570HS

30" Gas Range Double Oven

WGRN585HS

36" Gas Range Pro Style

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.